HG type rotary grille decontamination machine is composed of a unique rake tooth assembled into a set of rotary grille chains. Driven by the motor reducer, the rake tooth chain rotates against the direction of the water flow to salvage the scum floating on the water. When the rake tooth chain moves to the upper part of the equipment, due to the guidance of the sheaves and curved rails, each group A relative self-cleaning movement occurs between the rake teeth, and most of the solid matter falls down by gravity. The other part relies on the reverse movement of the cleaner to clean the debris stuck on the rake teeth.

The rake tooth chain is similar to the grid according to the direction of water flow. The rake tooth gap assembled on the rake tooth chain shaft can be selected according to the use conditions. When the rake teeth separate the solid suspended solids in the fluid, they can ensure the smooth flow of water. The entire working process is continuous or intermittent.

Features

The advantages of this equipment are high degree of automation, high separation efficiency, low power consumption, no noise, good corrosion resistance, continuous and stable operation when left unattended, and a mechanical overload safety protection device. When the equipment fails, the shear pin will cut off, which can prevent the equipment from being overloaded and damaging the equipment components.

This equipment can arbitrarily adjust the operation interval of the equipment according to the user's needs to achieve periodic operation; it can automatically control the start and stop of the equipment according to the liquid level difference before and after the grille; and it has a manual control function to facilitate maintenance. Users can choose any one according to different work needs.

Due to the reasonable structural design of the equipment, it has a strong self-purification ability when the equipment is working, and will not cause blockage, so the daily maintenance workload is very small.

Ordering instructions

1.Please indicate when ordering: groove width, groove depth, water depth, installation angle, grid gap, slag discharge height, and material requirements.

2.This machine can be equipped with an automatic control system (liquid level difference, time).

Specifications and models: